Table of Contents
Advertisement
Power Cable
You must provide a power cable.
The power cable is required to meet the specifications below.
(1)
Plug
(2)
Flexible cable
(3)
Appliance
coupler
For Japan
Plug
Code
Connector
C series Rev.2
Item
Comply with local safety regulation
- Class I（2P+PE）, AC250V, 6A or 10A
Ex.: CEE Pub.7 Certified, CCC Certified, KC Certified,
- Class I（2P+PE）, AC125V, 7A or 12A or, 15A etc.
Ex.: UL Certified, PSE Certified, BSMI Certified
Comply with IEC/EN standards or local safety regulation
Ex.: IEC 60227-1:
IEC 60227-5:
EN 50525-1:
EN 50525-2-11: Electric cables - Low voltage energy cables
Comply with IEC/EN standards or local Safety regulation
- IEC / EN 60320-1: Appliance couplers for household and
- Standard Sheet C13: AC250V / 10A
(1)
Item
PSE qualified
Class I (2P+PE), AC125V, 7A or higher
PSE qualified
0.75mm
or larger
2
PSE qualified
IEC 60320-1 Standard Sheet C13:AC125V/10A or higher
Specification
BS1363, PSB Certified, BIS Certified, SABS Certified
General requirements
Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V
- Part 5: Flexible cables (cords)
General requirements
of rated voltages up to and including
450/750 V (Uo/U) -
general applications - Flexible cables with
thermoplastic PVC insulation
similar general purposes - Part 1: General
requirements
(2)
Specification
C12 Manipulator 6. Options
Part
2-11: Cables for
(3)
223
Advertisement
Table of Contents
