Regular Inspection For C8 Manipulator; 2.1 Inspection; Schedule For Inspection - Epson C Series Manual

1. Regular Inspection for C4 Manipulator
This chapter describes maintenance inspection procedures. Performing maintenance
inspection properly is essential to prevent trouble and ensure safety.
Be sure to perform the maintenance inspections in accordance with the schedule.
1.1 Inspection

1.1.1 Schedule for Inspection

Inspection points are divided into five stages: daily, monthly, quarterly, biannual, and annual.
The inspection points are added every stage.
If the Manipulator is operated for 250 hours or longer per month, the inspection points must
be added every 250 hours, 750 hours, 1500 hours, and 3000 hours operation.
1 month (250 h)
2 months (500 h)
3 months (750 h)
4 months (1000 h)
5 months (1250 h)
6 months (1500 h)
7 months (1750 h)
8 months (2000 h)
9 months (2250 h)
10 months (2500 h)
11 months (2750 h)
12 months (3000 h)
13 months (3250 h)
20000 h
h = hour
C series Rev.2
Regular Inspection 1. Regular Inspection for C4 Manipulator
Daily Monthly
inspection inspection
√
√
√
√
√
√
√
√
√
√
√
√
√
Inspection Point
Quarterly Biannual
inspection inspection
√
√ √
√
√ √
Annual Overhaul
inspection (replacement)
√
√
231