Specifications; Specifications Table - Epson C Series Manual

C8 Manipulator 2. Specifications

2.5 Specifications

2.5.1 Specifications Table

For the specification of each model, refer to "Appendix A: Specifications Table".
2.5.2 Option
C8 series have the following options.
For details of options, refer to "6. Options".
User wires and pneumatic tube
Adjustable mechanical stop
Tool adapter
Camera plate unit
Brake release box *1
104
Standard user connector kit
Waterproof user connector kit : IP67 waterproof D-sub 15-pin × 2
Fittings for customer use
Adjustable mechanical stop
C8 ISO flange (J6)
Camera mounting tool (common for C3 and C4 series)
For EU (power supply voltage 200 V, short connector included)
For US/JP(power supply voltage 100 V, short connector included)
Short connector for the brake release box
*1: When using the brake release box with C8 series, it is necessary to connect the
short connector to the M/C power cable or connect the M/C power cable with the
Controller. (The brake release box can be used while the Controller is de-
energized state.)
If you are using C3 or C4 series Manipulator and already have the brake release
box, you can use it by connecting the M/C cable with the Controller, or purchasing
the short connector separately and connecting it to the M/C power cable.
: Standard D-sub 15-pin × 2
IP67 waterproof for RJ45 × 2
: ø6, straight × 2
ø6, elbow × 2
: J1
C8/C8L_J2
C8XL_J2
J3
C series Rev.2