NEC Express5800 140Rd-4 User Manual page 103

Option Parameter
AC-LINK Stay Off
[Last State]
Power On
Power ON [0] - 255
Delay Time
FRU LED Disabled
Feature [Enabled]
Clear FRU [No]
LED Yes
Platform Disabled
Event [Enabled]
Filtering
The table below shows the operation when the AC power to the server is turn off once and then on again, depending on the
setting of "AC-LINK."
System status before AC power off
Operating
Aborting (DC power being off also)
Forced shutdown
* Press the power switch continuously at least four seconds. This forcibly turns off the power.
IMPORTANT:
UPS when the server is connected to UPS.
Description
Indicates the AC-LINK function. Shows the state of the power of the
server.
Sets the power on delay time when "Power On" or "Last State" is specified
for AC LINK.
Select "Enabled" to turn on the error lamp to identify the location if the
system detects a failure.
Select "Yes" to turn off the FRU LED. When the faulty component is
replaced, turn off the FRU LED.
Enables or disables the Platform Event Filtering feature of the baseboard
management controller (BMC).
Setting of AC-LINK
Stay Off
Off
Off
Off
Set this item to "Power on" in order to link the AC power source supplied from
Last State Power On
On On
Off On
Off On
4-21
Your Setting
[ ]: Factory-set