NEC Express5800 140Rd-4 User Manual page 92

4-10
Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced."
To display a submenu, position the cursor on a selection that has a submenu (preceded by the
See the table below for the items.
Option Parameter
Boot-time [Disabled]
Diagnostic
Enabled
Screen
Reset [No]
Configuration
Yes
Data
NumLock On
[Off]
Memory/ [Boot]
Processor Error
Halt
Description
Specify whether the self-diagnosis (POST) running screen is displayed or
not on boot.
If this item is set to "Disabled," the manufacturer logo appears during
POST. (Pressing Esc in the status causes the screen display to be
switched to the POST execution screen.
The Boot-time Diagnostic Screen is automatically enabled if the Console
Redirection is enabled.
Select "Yes" to clear the extended system configuration data area
(system information stored by POST). The parameter is changed to "No"
after the system is booted.
Specify whether NumLock is enabled or disabled on boot.
Indicates whether POST is paused once at the occurrence of a
processor or memory error during the execution of POST.
When processor error or Memory error is encountered, the utility is not
paused at the end of POST if this item is set to "Halt" and even though
"POST Error Pause" of "Server" menu is "Enabled".
symbol and press Enter.
)
Your Setting
[ ]: Factory-set