NEC Express5800 140Rd-4 User Manual page 255

NOTE:
Confirm that the handle is hooked to the frame when having inserted the hard disk drive.
7.
Install the front bezel that was removed
Removal
Take th e foll wing steps to remove the hard disk drive. To use the server wi o
drive carrier into the slot.
1.
Shutdown the system and press the POWER switch to turn off the power.
2.
Unlock the hard disk drive.
3.
Firmly hold the additional hard disk drive and handle, and then take them out.
NOTE:
If removing a failing hard disk
disk drive is amber before starting the removal.
in step 2.
th the hard disk drive removed, insert the empty
2
1
drive, confirm the slot in which the DISK lamp
9-7
of the hard