NEC Express5800 140Rd-4 User Manual page 283

(8) Pull out the server from the rack with the power being on.
(9) Remove the rear access cover and locate the board to be removed.
NOT : E
Confirm that the PCI Slot Power lamp of the target PCI slot is off.
2.
Disconne ct all the cables from the PCI board.
3.
Push the tab to unlock it, slowly open the tab, then remove the PC
IMPORTANT:
Do not open the retention tab to 90 degrees or more. Doing so could dama
tab.
Tab
4.
Slowly insert the PCI board into the server.
5.
Push the PCI board until the connection part
IMPORTANT:
If failing to install the
excess force to the PCI board when han
PCI board.
I board.
Lock (for long card)
of the board is firmly connected into the slot.
PCI board correctly, reinstall it. Be careful not to ap
dling it. Applying excess force may cause damage to
9-35
ge the
ply
the