NEC Express5800 140Rd-4 User Manual page 139

1
2
3
4
1 The default host name to be used when no host name is configured for using DHCP
2
Enter the host name of BMC. If nothing is set here, the default host name in the previous step will be used.
3 Enter the domain name of the network to which BMC belongs.
4 Choose whether or not to register the host name to the DNS server.
NOTE:
It is recommended to specify a name that is easy to imagine the host name in the server
operating system (for Windows, a computer name) for a BMC host name.
For example, if the host name on the server operating system is "sapphire", you may set BMC
"sapphire_bmc" for a BMC host name.
IMPORTANT:
a BMC host name and a domain name cannot be exactly the same as those on the server operating
system. If BMC belongs to a different network domain, you can have the same host name.
When you click [OK], all the information in the Network Configuration window with three tabs will be written into BMC.
When you click [Cancel], the Network Configuration window closes discarding what you have configured.
Because BMC uses a LAN controller independent of the server operating system,
4-57