8-5
LAN1/LAN2 ACCESS Lamp
The LAN1/LAN2 ACCESS lamp is lit green when the server is connected to LAN. The lamp blinks while the server is
accessed through the LAN (for packet transmission). The value next to the icon indicates the number of the network port on
the rear panel.
LAN1 ACCESS lamp
LAN2 ACCESS lamp
UID Lamp
Pressing the UID switch turns the UID lamp located on the front and rear of the server on and off. The UID lamp is visible
through the rear of the chassis and allows you to locate the server you're working on from the rear of the servers on a rack.
Pressing the UID switch again turns off the UID lamp.
You can make the ESMPRO Manager, DianaScope, or the remote management feature of Web server to flash the UID lamp.
When you finished working, turn off the UID lamp.
UID switch
UID lamp
UID lamp