NEC Express5800 140Rd-4 User Manual page 151

No Error Message
2 Failed to acquire BMC
Configuration:
3 Used by other software program.
Try again after a while.
4 Invalid BMC configuration file.
5 The required XML tag is not
found.
6 Failed to write the file.
7 Invalid user name
8 The user name is too long
9 The password is too long.
10 Passwords are not matched.
11 Invalid HTTP port number
12 Invalid SSL port number
13 HTTP/SSL should not be the
same.
14 Invalid login attempt period
15 Invalid failed login attempts
16 Invalid account lock period
17 Invalid IP address
18 Invalid subnet mask
19 Invalid default gateway
20 Invalid DNS server IP address
21 Invalid host name
22 Invalid domain name
23 The SMTP server address is too
long.
24 Invalid SMTP port number.
25 Invalid retry count
26 Invalid retry interval
27 "To" is too long.
28 "From" is too long.
29 "Subject" is too long.
30 The message is too long.
31 Failed to open the file:
32 Failed to close the file:
33 Can't open the file:
34 Timeout has occurred.
What to do
Check the network environment and try again.
Contact your service representative if the error persists.
Try again after a while.
The BMC configuration file may be corrupted. Check the file.
The BMC configuration file may be corrupted. Check the file.
The BMC configuration file is not saved successfully. Change the location to
save the file and try again.
You can use only alphanumeric characters, minus sign (–), and underscore (_)
for a user name. A user name should be 32 characters or less.
A user name should be 32 characters or less.
Use 16 or less characters.
Again, input passwords.
You can use only numeric values.
You can use only numeric values.
The same port number can't do them. Specify different value.
You can use only numeric values.
You can use only numeric values.
You can use only numeric values.
Use numerals and periods to specify an IP address.
Use numerals and periods to specify a subnet mask.
Use numerals and periods to specify a default gateway.
Use numerals and periods to specify the IP address of DNS server.
You can use only alphanumeric characters, minus sign (–), and underscore (_)
for a host name. A host name should be 64 characters or less.
You can use only alphanumeric characters, minus sign (–), and underscore (_)
for a domain name. A domain name should be up to 256 characters.
Specify within 256 characters.
You can use only numeric values.
You can use only numeric values.
You can use only numeric values.
Specify within 256 characters.
Specify within 256 characters.
Specify within 512 characters. If you use Japanese characters, the number of
characters you can use is less than half of 512 characters.
The message should be up to 4064 characters. If you use Japanese
characters, the number of characters you can use is less than half of 4064
characters.
The specified file may not exist. Check the file name.
The specified file may be corrupted.
The specified file may not exist. Check the file name.
Try again. If the error persists, contact your service representative because a
failure may have occurred in BMC.
4-69