NEC Express5800 140Rd-4 User Manual page 228

8-26
Messages displayed on lower line
On-screen message
Proc Missing
240VA Power Down
Power On Cnt Alm
Proc1 VccpAlm XX
Proc2 VccpAlm XX
Proc3 VccpAlm XX
Proc4 VccpAlm XX
BB +3.3v Alm XX
BB +3.3vs Alm XX
BB +5.0v Alm XX
BB +5.0vs Alm XX
BB +12v Alm XX
BB -12v Alm XX
VBAT Alm XX
BB +1.25v Alm XX
BB +1.5v Alm XX
BB +1.8v Alm XX
BB VTT Alm XX
VDD TNB Alm XX
VCACHE1 Alm XX
VCACHE2 Alm XX
Proc 1 T-Trip
Proc 2 T-Trip
Proc 3 T-Trip
Proc 4 T-Trip
Processor 1 IERR
Processor 2 IERR
Processor 3 IERR
Processor 4 IERR
SB1 +3.3v Alm XX
SB1 +5.0v Alm XX
SB1 +12v Alm XX
SB2 +3.3v Alm XX
SB2 +5.0v Alm XX
SB2 +12v Alm XX
SCSI A-1 Alm XX
SCSI A-2 Alm XX
SCSI A-3 Alm XX
SCSI B-1 Alm XX
SCSI B-2 Alm XX
SCSI B-3 Alm XX
Proc1 TempAlm XX
Proc2 TempAlm XX
Proc3 TempAlm XX
Proc4 TempAlm XX
BB Temp Alm XX
FP Temp Alm XX
OS shutdown Alm
WDT timeout
DUMP Request!
SMI timeout
AC lost Alm 1
AC lost Alm 2
AC lost Alm 3
AC lost Alm 4
Description
Processor is not found.
POWERGOOD dropped during power-on.
POWERGOOD signal error occurred at power on/off.
VCCP voltage alarm occurred on processor #1.
VCCP voltage alarm occurred on processor #2.
VCCP voltage alarm occurred on processor #3.
VCCP voltage alarm occurred on processor #4.
+3.3V voltage alarm occurred on I/O board.
+3.3Vs voltage alarm occurred on I/O board.
+5.0V voltage alarm occurred on I/O board.
+5.0Vs voltage alarm occurred on I/O board.
+12V voltage alarm occurred on I/O board.
-12V voltage alarm occurred on I/O board.
Voltage alarm in lithium battery occurred.
+1.25V voltage alarm occurred on I/O board.
+1.5V voltage alarm occurred on I/O board.
+1.8V voltage alarm occurred on I/O board.
+1.150V voltage alarm occurred on I/O board.
+1.500V voltage alarm occurred on processor board.
VCACHE1 voltage alarm occurred on processor board.
VCACHE2 voltage alarm occurred on processor board.
Thermal Trip occurred on processor #1.
Thermal Trip occurred on processor #2.
Thermal Trip occurred on processor #3.
Thermal Trip occurred on processor #4.
IERR occurred on processor #1.
IERR occurred on processor #2.
IERR occurred on processor #3.
IERR occurred on processor #4.
+3.3V voltage alarm occurred on SCSI backplane 1.
+5.0V voltage alarm occurred on SCSI backplane 1.
+12V voltage alarm occurred on SCSI backplane 1.
+3.3V voltage alarm occurred on SCSI backplane 2.
+5.0V voltage alarm occurred on SCSI backplane 2.
+12V voltage alarm occurred on SCSI backplane 2.
SCSI channel-A voltage error occurred.
SCSI channel-A voltage error occurred.
SCSI channel-A voltage error occurred.
SCSI channel-B voltage error occurred.
SCSI channel-B voltage error occurred.
SCSI channel-B voltage error occurred.
Processor #1 thermal error occurred.
Processor #2 thermal error occurred.
Processor #3 thermal error occurred.
Processor #4 thermal error occurred.
I/O board thermal error occurred.
Front panel thermal error occurred.
Operating system shutdown alarm occurred.
Watchdog timer timeout error occurred.
Dump switch is pressed.
SMI timeout occurred.
AC lost occurred on power unit #1.
AC lost occurred on power unit #2.
AC lost occurred on power unit #3.
AC lost occurred on power unit #4.
Action
Contact your service representative.