Front View (With Front Bezel Removed) - NEC Express5800 140Rd-4 User Manual

Front View (with Front Bezel Removed)

See Chapter 8 for detail information on lamp indication.
4
5
5-1 5-2
1 CD-ROM drive
The CD-ROM drive reads
1-1: Access lamp (lit orange during accessing)
1-2: CD tray eject button
1-3: Emergency hole
2 3.5 -inch hard disk bay /3.5-inch device bay
Ad ditional hard disk driv e slots. A hard disk drive of 1-inch high can be installed in this slot. The number following the
bol d-faced number indicates SCSI ID. When additional HDD cage with 3.5-in
2-4 are used for 3.5-inch device bay.
3 Dis k lamp (green/amber)
The disk lamp is lit green if a h
Du ring the rebuild processing,
4 P ro cessor board
U p to four processors can be connected to this board.
4-1 Board ejector
5 Me mory board
Up to four DIMMs can be connected to this board
5 -1 Board ejector
5-2 POWER lamp
5-3 Attention lamp
5 -4 Redundancy lamp
5 -5 Attention switch
6 Ad ditional memory board slot
The number following the
Additional memory boar d s
2-4 2-2
2-3 2-1
3
4-1
5-3
6-2
5-4 5-5
data from the inserted CD-ROM.
ard disk installed in the server is accessed. If a hard disk is defected, the lamp is lit amber.
the lamp is lit green or amber alternately. (This occurs only in the disk array configuration.)
.
bold-faced character indicates the slot number.
hall be installed in the slot #2, #3, and then #4 in the order.
1-2
2-0
1-3
1-1
1
3
6-4
ch bay (dedicated BTO option), slots 2-3 and
2-5
3
6-3