Expressbuilder For Windows-Based (Master Control Menu) - NEC Express5800 140Rd-4 User Manual

EXPRESSBUILDER for Windows-Based (Master Control Menu)

The Master Control Menu is used to,
Read the User's Guide or the other documents,
Update the Express5800 system, and
Install the management software.
NOTES:
Master Control Menu requires Microsoft® Windows® 95 (or later) or Windows NT® 4.0 (or
later).
Some documents are provided in the PDF format. Use the Adobe Reader to view or print
these documents.
Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu appears on the screen automatically. If the CD-ROM Autorun function is invalid in your system, run the
\MC\1ST.EXE file in the CD-ROM directly.
Some items are greyed-out if the logon user does not have the authority of the administrator or the item is not proper for the
system.
To use Master Control Menu,
Click [Online Document],[Setup] or [Quit], or
Click the right mouse button on the Master Control Menu window.
CONFIGURATION DISKETTE CREATOR
"Configuration Diskette Creator" is a tool to create [Configuration Diskette] that is used for configuring the server with the
Express Setup (see Chapter 5 for details).
If you use the Configuration Diskette created by the Express Setup and Configuration Diskette Creator to operate the setup,
you can setup from the installation of operating system to several utilities automatically except for a few key input to confirm
the specification. Also, you can install the system with the same specification as before when re-installing the system. We
recommend you to create [Configuration Diskette] to setup the servers from EXPRESSBUILDER.
When using a floppy disk, a USB floppy disk drive is required.
IMPORTANT: You cannot create [Configuration Diskette] for Microsoft® Windows Server™
2003 x64 Editions.
NOTE: You can install Windows Server™ 2003 without [Configuration Diskette]. Also, you can
6-9