NEC Express5800 140Rd-4 User Manual page 93

Memory Configuration
Selecting "Memory Configuration" on the Advanced menu shows the following screen.
See the table below for the items.
Option Parameter
DIMM Group Normal
#1 - #8 Not installed
Status Disabled
Memory [No]
Retest Yes
Extended 1MB
RAM Step 1KB
Every Location
[Disabled]
Online Spare [Disabled]
Memory Enabled
Memory RAS [Normal]
Feature Mirror
RAID
Hot-Add [Disabled]
Memory Enabled
Support
Description
Indicates the current memory status.
"Normal" indicates that the memory devices operate normally.
"Disabled" indicates that one or more memory devices are defected.
"Not Installed" indicates that no memory devices are installed. (Display
only)
Clears the DIMM group error status information. Run this menu when the
failed DIMM(s) are replaced.
"1MB" indicates that the memory test is done in the unit of 1MB. "1KB"
indicates that the memory test is done in the unit of 1KB. "Every-Location"
indicates that every memory device is tested. "Disabled" indicates that
only memory initialization is done.
Select "Enabled" to enable the Online Spare Memory feature.
Set the memory configuration. Select "Mirror" to enable the memory
mirroring function. Select "RAID" to enable the memory RAID function.
Specify whether to use the Hot-Add Memory feature on Windows Server
2003 Enterprise Edition or Datacenter Edition. Select "Enabled" to use the
Hot-Add Memory feature.
4-11
Your Setting
[ ]: Factory-set