NEC Express5800 140Rd-4 User Manual page 163

During the setup, the screen to specify the partition that Windows Server 2003 is to be
installed appears. The first 55 MB area displayed on the screen is a partition that is used to
store the configuration information or utilities unique of the server. We do not recommend to
delete this area but, if you do not want to reserve this 55 MB area, perform the installation by
manual setup. It is impossible to delete this area by Express Setup.
NOTES:
If you click [Cancel] in [Basic Information] screen, the screen will go back to select the
operating system. [Cancel] exists only in [Basic Information] screen.
If you click [OK] in [Role of Computer] screen, the setup automatically selects default value
for the later specification to continue the installation.
13.
Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk attached to mass storage driver into the
floppy disk drive and follow the message to operate the installation.
NOTE: You can use this function only when the floppy disk drive is attached to the system.
14.
Remove EXPRESSBUILDER CD-ROM from the CD-ROM drive according to the message.
If you proceed to the setup by using setup parameter file, remove the floppy disk from the floppy disk drive.
Insert Windows Server 2003 CD-ROM into the CD-ROM drive.
[Agree Software License Agreement] screen appears.
15.
Read the contents carefully and click [I agree.] or press F8 if you do agree. If you do not agree, click [I disagree] or
press F3.
IMPORTANT:
If you do not agree to this agreement, the setup terminates and Windows Server 2003 will not
be installed.
If "NetWare Gateway (and Client) Service" is specified to install, the window to specify the
details of "NetWare Gateway (and Client) Service" pops up on the first logon. Specify the
appropriate value.
16.
If you selected [Yes] on [Apply Service Pack] at Basic Information, follow the procedure below.
1) Follow the message to take Windows Server 2003 CD-ROM out of the CD-ROM drive.
2) Follow the message to insert Windows Server 2003 Service Pack 1 or later into the CD-ROM drive.
Windows Server 2003 and the specified application will be installed automatically and logon to the system. Install
and configure the device drivers.
Now the Setup using Express Setup has completed.
5-9