NEC Express5800 140Rd-4 User Manual page 330

E-6
NOTE:
If the [Select an operation] dialog box does not appear, start \SETUP.EXE from
CD-ROM drive.
5.
Select [Install Windows Server 2003].
Then, a dialog box asks to select the upgrade or clear installation.
6.
Select "Upgrade (recommended)" and click the Next.
Follow the messages and continue. The system will automatically restart after copying the files.
NOTE:
You can leave the Windows Server™ 2003 CD-ROM in the CD-ROM drive.
7.
If a disk array controller is attached to the device, press F6 while a message, " Press F6 if you need to install a third
party SCSI or RAID driver...", is on the screen.
IMPORTANT:
8.
When the following message is displayed, press S.
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage device(s).
The following message is displayed.
9.
Insert the Windows Server™ 2003 OEM-DISK for EXPRESSBUILDER into the floppy disk drive, and press Enter.
A list of mass storage devices is displayed.
Select the [LSI MEGARAID Products for Windows 2003 (x86)] and press Enter.
10.
Update the system.
11.
Install the driver and make detailed settings.
If PROSet is already installed, uninstall the PROSet before upgrading.
If the teaming function is enabled, disable the function before uninstalling PROSet.
During upgrade installation, [Disk Insert] dialog box may appear.
If it appears, insert the Windows Server™ 2003 OEM-DISK for EXPRESSBUILDER into the floppy disk drive, and
click [OK].
[Files Needed] dialog box may appear.
Enter "a:\" into "Copy files from:" and then click [OK].
There is no visible indication on screen when F6 has been pressed.
Please insert the disk labelled
manufacturer-supplied hardware support disk
into Drive A:
*Press ENTER when ready.