4.
Unlock the memory board to open the ejector.
IMPORTANT:
boar
d, turn off the power and wait for several minutes before pulling it out.
Note
that the hot-plug memory board is off-powered when it is unlocked (the LED goes off). Wait
seve
ral minutes in this state.
5.
Hold the ejector and pull the memory board out from the server.
6.
Put the memory board on a dry, clean, and
Installation
Install the memory board in reverse order of th
The memory board becomes very hot while being powered. When removing the
static-free place.
e removal steps.
9-39