NEC Express5800 140Rd-4 User Manual page 78

3-18
Printer with the
parallel interface
Keyboard
NOTE:
Make sure of the cable you are going to connect. The ICMB connector and the front
serial port B connector of this server have the same shape as the LAN connector. Be careful not to
connect a cable to a wrong connector.
Finally connect the provided
power cord to the receptacle.
If connecting the server to UPS,
see the explanation below.
Mouse
Device with the serial interface
(e.g., modem)
Direct connection to the leased
line is prohibited.
Hub (multiport repeater)
Use this inlet only
1000BASE-T / 100BASE-TX /
when an optional
10BASE-T
power supply unit is
additionally installed.
Hub
(multiport repeater)
100BASE-TX /
10BASE-T
Network system on LAN
(connected via a hub for
management purposes)
D evice with USB
(U SB1.1) interface
(e.g ., keyboard)
Device with the serial interface
(e.g., modem/management PC)
Direct connection to the leased
line is prohibited.
Device with
ICMB interface
Device with USB
interface (USB2.0)
(e.g., terminal
adapter)
Display unit