Exceptional Setup - NEC Express5800 140Rd-4 User Manual

5-18
2.
Select [Tools].
3.
Select [Off-line Maintenance Utility].
4.
Select [System Information Management].
5.
Insert a floppy disk into the floppy disk drive.
6.
Select [Save].

Exceptional Setup

This section explains how to setup by the exceptional way. You usually do not have to do as follows. The detailed information
is provided by the manual of the Mass Storage Device.
Installing a Mass Storage Device not Supported by ExpressSetup
If you want to install or re-install the operating system when the system has a new mass storage device not supported by
EXPRESSBUILDER, do as follows.
1.
Read the manual supplied with the mass storage device before setting the server.
2.
If the mass storage device is disk array controller, configure the RAID system before running the
EXPRESSBUILDER.
3.
Boot the system from EXPRESSBUILDER CD-ROM.
4.
(a) When the Disk array configuration dialogue appears, check "Use Existing Array".
(b) Check "Apply OEM-FD for Mass storage device".
5.
Copy the driver for the mass storage device in the ExpressSetup.
Insert the floppy disk attached the mass storage device into the floppy disk drive.
Continue the ExpressSetup, referring to the on-screen messages.