9-46
6.
Hold the ejector and pull the memory board out from the server.
7.
To set back the memory boar
procedure. Then, press the Atten
and after a while, it goes on. Th
IMPORTANT:
boards so that they can have redundancy.
8.
Install the memory board in rev
This completes Hot Replace of memory
ds in redundant configuration, install the memory boards in reverse order of re
tion switch on the memory board. The memory board Power lamp star
e Memory Board Redundancy lamp goes on.
To set b
ack the memory boards in redundant configuration, be sure to install the
erse order of the removal steps.
board.
moval
ts flashing,