NEC Express5800 140Rd-4 User Manual page 152

4-70
Firmware update errors
No Error Message
1 There are uncompleted update
images on BMC as follows:
2 Failed to acquire status of the
update area.
3 Update data is too large:
4 Failed to prepare update
5 Invalid file size:
6 Could not find the revision
information:
7 Failed to create rollback image.
8 Failed to erase.
9 Unsupported format version:
10 Failed to load the update image
file.
11 Update has failed.
12 Could not switch to the update
mode.
13 Could not find the update targets:
14 Invalid address:
15 Writing has failed.
16 Unsupported token is detected:
17 Invalid segment information:
18 Invalid data length:
19 Failed to open the file:
20 Failed to close the file:
21 Invalid file checksum:
22 Failed to parse files.
23 Failed to parse files:
24 Failed to load files:
25 Could not find files:
26 Failed to verify
27 Update will be stopped because
interruption has occurred.
28 Online update is now being used.
29 Failed to acquire the current
revision.
30 Failed to acquire lines:
31 Invalid line length:
32 Unexpected EOF is detected:
33 Unexpected token is detected:
34 PIA does not suit this server.
What to do
Reboot the server and complete the update.
The network may be busy. Try again. If the error persists, contact your service
representative because a failure may have occurred in BMC.
Some update files may be corrupted. Acquire update files again.
The network may be busy. Try again. If the error persists, contact your service
representative because a failure may have occurred in BMC.
The update file may be corrupted. Acquire the update file again.
Some update files may be corrupted. Acquire update files again.
Try again. If the error persists, contact your service representative because a
failure may have occurred in BMC.
Try again. If the error persists, contact your service representative because a
failure may have occurred in BMC.
Some update files may be corrupted. Acquire update files again.
Some update files may be corrupted. Acquire update files again.
Try again. If the error persists, contact your service representative because a
failure may have occurred in BMC.
Try again. If the error persists, contact your service representative because a
failure may have occurred in BMC.
Some update files may be corrupted.
Acquire update files again.
Some update files may be corrupted.
Acquire update files again.
Try again. If the error persists, contact your service representative because a
failure may have occurred in BMC.
Some update files may be corrupted.
Acquire update files again.
Some update files may be corrupted.
Acquire update files again.
Some update files may be corrupted. Acquire update files again.
The specified file may not exist. Check the file name.
The specified file may be corrupted.
Some update files may be corrupted. Acquire update files again.
Some update files may be corrupted. Acquire update files again.
Some update files may be corrupted. Acquire update files again.
Some update files may be corrupted. Acquire update files again.
Some update files may be corrupted. Acquire update files again.
Try again. If the error persists, contact your service representative because a
failure may have occurred in BMC.
Check clients. A software program other than you are using may have
interrupted.
Try again as necessary after online update performed by other tool is
completed.
The network may be busy. Try again. If the error persists, contact your service
representative because a failure may have occurred in BMC.
Some update files may be corrupted. Acquire update files again.
Some update files may be corrupted. Acquire update files again.
Some update files may be corrupted. Acquire update files again.
Some update files may be corrupted. Acquire update files again.
It is not Platform Information (PIA) of this server. Acquire update files again.