Cleaning And Replacing Fan Filter Of Option Unit - Epson RC180 Manual

6.1.3 Cleaning and Replacing the Option Unit Fan Filter
Option Unit (1) Turn OFF the Controller.
Fan Filter
(2) Remove the mounting screw for each fan
Remove
NOTE

Option Unit (1) Insert the fan filters into the Option Unit and secure each of them with a screw.
Fan Filter
(2) Plug in the power connector. Turn ON the Controller and make sure that the
Mount
RC180 Rev.17
Maintenance 6. Maintenance Parts Replacement Procedures
filter located on the top and the bottom of
the Option Unit.
Two fan filters are mounted on the
Option Unit. Be sure to replace both at
the same time.
Clean the fan filter when it is necessary.
Controller starts properly without any vibration or abnormal noise.
Fan Filters
Screws
145