Epson RC180 Manual page 245

No. Message
Specified point label is beyond the
7030 maximum length. Specify a valid point
label.
Description for the specified point is
7031 beyond the maximum length. Specify
a valid description.
Point file is corrupted. Check sum
7032
error.
Specified point file cannot be found.
7033
Specify a valid point file name.
7034 Cannot save the point file.
7035 Cannot save the point file.
7036 Cannot save the point file.
7037 Cannot save the point file.
7038 Cannot save the point file.
7039 Cannot save the point file.
The point label is not correct. Specify
7040
a valid point point label.
The point label is not correct. Specify
7041
a valid point point label.
RC180 Rev.17
Remedy
Change the point label.
Change the comment.
Create the point file again.
Check the name of the specified point
file.
Failed to save the point file (create a
temporary file).
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
Failed to save the point file (file open).
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
Failed to save the point file (renew the
file header).
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
Failed to save the point file (create the
file name).
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
Failed to save the point file (copy the
file).
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
Failed to save the point file (change the
file name).
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
The initial character of the point label
name is improper. Correct the label
name.
Inadequate character is used.
Correct the label name.
Maintenance 8. Trouble Shooting
Note 1 Note 2
233