(7) [Controller Status Viewer] dialog appears to confirm the Controller status.
6.3.4 Transfer with E-mail
Follow this procedure to transfer the data by e-mail that was saved to the USB memory.
(1) Insert the USB memory to a PC that supports sending of e-mail.
(2) Make sure that the USB memory has following folders.
(3) Send all the folders by e-mail.
NOTE
Delete files that do not relate to the project before transfer.
This function is used to send the data to the system director and EPSON from the end
users for problem analysis.
RC180 Rev.17
For details, refer to View Controller Status in EPSON RC+ 5.0 User's Guide 5.11.7
Controller Command (Tools Menu).
S_serial number_data status was saved
→ Example: S_12345_200608074410
Setup & Operation 6. Memory Port
43