In Windows Device Manager - Epson RC180 Manual

Maintenance 8. Trouble Shooting
8.2.2 When recognized under "Other devices" in Windows Device Manager
If "EPSON Robot Controller RC170 (or RC180)" is recognized under "Other devices" in
the Windows device manager as shown in the following dialog, delete "EPSON Robot
Controller RC170 (or RC180)" from the device manager and connect the USB cable again
to correct the problem.
(1) Select and right click "EPSON Robot Controller RC170 (or RC180)" in the [Device
(2) Select [Uninstall].
(3) The [Confirm Device Removal] dialog appears.
(4) Remove the USB cable and connect the USB cable again. The following message
(5) When the Controller is installed automatically and the following message appears, the
NOTE

If the problem is not corrected, please contact EPSON.
246
Manager] dialog.
Click the <OK> button.
appears at the right bottom of the Windows screen.
communication is available.
RC180 Rev.17