Epson RC180 Manual page 194

Maintenance 8. Trouble Shooting
No. Message
7750 Initialization failure.
7751 Failed to save the objects.
7752 Failed to load the objects.
7753 Failed to mapping of memory.
7754 The virtual controller already exists.
Failed to create the virtual controller
7755
connection information.
The copy source of the virtual controller
7756
does not exist.
The copy destination of the virtual
7757
controller already exists.
Failed to copy the virtual controller
7758
connection information.
Failed to delete the virtual controller
7759
connection information.
Failed to delete
7760
connection information.
Failed to rename
7761
connection information.
The rename source of the virtual
7762
controller does not exist.
The rename destination of the virtual
7763
controller already exists.
7764 Invalid Robot number.
7765 Failed to read the Robot definition file.
7766 Failed to copy the layout objects.
7767 Failed to cut the layout objects.
7768 Failed to paste the layout objects.
7769 Failed to remove the Robot.
Cannot execute
7770
version.
182
Reboot RC+.
Reboot RC+.
Reboot RC+.
Reboot RC+.
Name of the virtual controller may be
duplicated. Check the virtual controller
name.
Reboot RC+.
Check the virtual controller name.
Name of the virtual controller may be
duplicated. Check the virtual controller
name.
Reboot RC+.
Reboot RC+.
the controller
Reboot RC+.
the controller
Check the virtual controller name.
Check the virtual controller name.
Check the virtual controller name.
Reboot RC+.
Check whether the definition file exists.
Reboot RC+
Reboot RC+
Reboot RC+
Reboot RC+
with unsupported
Update RC+ to the latest version
Remedy Note 1 Note 2
RC180 Rev.17