ABB REC 561 User Manual page 321

1MRK 580 150-XEN
Page 6 - 36
4.2.3 Station MMI
Apparatus control
The connection to the station MMI is made via EVENT-block and MultC-
mdFunc-block in a standardized way. Fig. 21 shows the command con-
nections between the command blocks and the apparatus control modules.
Fig. 21 also shows how the BLKCON modules are used.
Bay commands
from station
MMI
MultCmdFunc
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
OUT9
OUT10
OUT11
OUT12
OUT13
OUT14
OUT15
OUT16
Defined as pulse outputs
Apparatus commands
from station MMI
MultCmdFunc
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
OUT9
OUT10
OUT11
OUT12
OUT13
OUT14
OUT15
OUT16
Defined as pulse outputs
Fig. 21 Command connections between the station MMI and
apparatus control modules
Fig. 22 shows the signals from the apparatus control modules for one
apparatus that will be sent to the station MMI. The event input 7 can be
connected to the tripping logic to indicate on the station MMI that the cir-
cuit breaker was opened due to a trip from the protection. The inputs 3 and
ABB Network Partner AB
BAYCON
S_R
S_S
STATION
BLK_OP
DBLK_OP
BLK_UPD
DBLK_UPD
Apparatus1
COMCON
S_BLK_OP
S_DBL_OP
S_BL_UPD
S_PR_UPD
S_MA_U_O
S_MA_U_C
S_CANCEL
S_SEL_O
S_SEL_C
S_OPEN
S_CLOSE
S_IR_OVR
BLK_OP
DBL_OP
Version 1.0-00
BLKCONK
& BLKCMD1
DBLCMD1
&
BLK_OUT1
BLKCMD2
&
DBLCMD2
&
BLK_OUT2
Apparatus1
BLKCONL
BLK_1_1
I/O error
BLK_1_2
BLK_1_3
BLKCMD1
DBLCMD1
BLK_OUT1
Apparatus1
SWICON
MA_UPD_P
UPD_BLK
BLK_OPEN
BLK_CLOS
(X80150-21)