Settings; Functions; Changing Of An Active Setting Group; Disturbance Report - ABB REC 561 User Manual

1MRK 580 189-XEN
Page 3 - 40

4 Settings

4.1 Functions

4.2 Changing of an active
setting group

4.3 Disturbance report

4.4 Internal time

5 Terminal status

5.1 Self supervision -
report
Menu tree REC 561
Use this menu to set different parameters within the built-in functions.
You can set different setting parameters for basic and optional protection
and automation functions that are built into the terminal. The parameters
are independent of each other, within four separate setting groups.
Users can select the active setting group in a dialogue window, using a
command with confirmation.
You can set these parameters from the Disturbance report submenu:
• On or Off, which specifies if the disturbance reporting unit is acti-
vated or deactivated.
• Recording times, for example, pre-fault, post-fault, and limit time.
• Triggering functions.
• Masking - to enable man machine communication of up to 48 binary
signals that are selected when configuring the terminal.
• Up to 10 analogue signals that are recorded by the disturbance
recorder (when they are included in the terminal).
• Triggering mode (overfunction, underfunction, and Off-mode, as
necessary).
Use this submenu to set and read the internal time (year, month, day, hour,
minute, second) of a terminal.
This menu displays some of the most important information on the termi-
nal. This information consists of:

• Self supervision - report

• ID of the terminal
The terminals of the REx 5xx series have built-in extensive self-supervi-
sion functions, which inform the user about errors detected in the termi-
nal.
If an error occurs in the terminal, a general warning signal appears,
together with information about the faulty module in the terminal. In addi-
tion, a self-supervision function also displays the status of time synchroni-
zation.
ABB Network Partner AB
Version 1.0-00