Testing - ABB REC 561 User Manual

1MRK 580 136-XEN
Page 7 - 68
3 Setting

4 Testing

Indications
The signals to be displayed as indications are selected in the Disturbance
report setting. This can be found on the built-in MMI at:
Settings
DisturbReport
See "Disturbance report - Settings", in "1MRK 580 133-XEN", for more
information.
If TestMode is activated and
TestMode/DisturbReport/ is set to ...
Operation = On DisturbSummary = On or Off Are stored as usual in the terminal.
Operation = Off DisurbSummary = On
Operation = Off DisturbSummary = Off
BinarySignals
Input n (up to 48)
Then the disturbances ...
Summary scrolls. No indications.
No storage of LED information.
Are not stored. LED information not
stored.
ABB Network Partner AB
Version 1.0-00