Install The Ilp Vacuum Hoses; Figure 92 Routing The Vacuum Hose To The Ilp - HP Indigo Division Series Instruction For Use & Installation Instructions

Install the ILP vacuum hoses

Figure 92 Routing the vacuum hose to the ILP

3 2
1 ILP vacuum hose
2 Hose securing band
3 ILP vacuum hose adapter
1. Install the ILP vacuum hose adaptor to the ILP using four screws (Figure 92).
2. Route the hose connected to the lower blower in electrical cabinet M1 to the vacuum hose
connection at the rear of the ILP (Figure 92).
3. Mount the hose securing band to secure the hose to the adapter.
W3250_ILD_VACUUMHOSE_8363
1
CA294-03070 rev 00
Installation Manual
page 112 of 153