Leveling The Printing Engines; Figure 30 Using A Level At The Printing Engine Front - HP Indigo Division Series Instruction For Use & Installation Instructions

5. Reinstall the front exit door lower hinge using the original screws.
6. Remount the front exit service door within its frame.
7. Reinstall the top bracket to secure the door.
Use the original screws to secure the bracket.

Leveling the printing engines

Figure 30 Using a level at the printing engine front

1 Front base
2 Level
3 Leveling bar jig
8. To level each printing engine, do the following (Figure 30):
a. Remove the grounding cable screws at the front base.
Place the jig and level on the flat surface of the front base.
CA294-03070 rev 00
1
2
3
1
PUBLISHER-1022
Installation Manual
page 46 of 153