HP Indigo Division Series Instruction For Use & Installation Instructions page 13

Heading Step Reference
Production 64. Production flow on
flow page 130
th
4 Day
65. Install the finishing
Rewinder jig
components on page
and finishing
130
components
66. Installing the turnbar
Turnbar
stepping plate on
stepping plate
page 130
67. Install the main power
connection and
Transformer
transformer on page
130
68. Initial power-up on
page 131
Initial
power-up
69. Threading the web on
Thread web
page 138
Configure 70. Configure the press
press software on page 139
PIP and 71. Install PIP and
blankets blankets on page 139
th
5 Day
72. Testing and
ATP calibrating the press
on page 139
Procedure
Organize and install network cabling, RIP
systems, HPPF units to aid production
flow.
Install the rewinder jig to test the press.
After testing, install finishing components
according to customers design and Site
Preparation Guide.
Install turnbar stepping plate.
A local qualified electrician should install
and connect the transformer and electrical
mains power connections.
Perform initial power up as detailed on
page 131.
Local electrician to be present at startup to
check mains power connections.
Mount a roll at unwinder and thread to
finisher according to
Install latest version of press software with
authorization codes.
Mount and install PIP and blankets on
relevant drums.
Test and calibrate press:
Emergency stop tests on page 139.
Checking the web flow on page 140.
Checking the ILP priming unit on page 140.
Testing the printing engine on page 141.
In the Diagnostics>Elements Ink Flow
tab perform tests
Testing printing engine voltages on page
142.
Performing integration and testing on page
143:
1. Build the inks.
2. Verify that the ink flows.
3. Verify that the second transfer
pressure is correct.
4. Install a new blanket and PIP foil.
5. Adjust the BID pressure.
6. Perform the first transfer pressure
calibration.
7. Verify the writing head skew.
Changing the skew may affect focus.
CA294-03070 rev 00
Installation Manual
Notes and
check
page 13 of 153