Install The Roof Covers; Figure 61 Attaching The Top Cover To The Baseplate; Figure 62 Connecting The Cables To The Hvps - HP Indigo Division Series Instruction For Use & Installation Instructions

Figure 61 Attaching the top cover to the baseplate

1 Baseplate
2 Screws securing top cover to baseplate (4 places)
Use four MBG 4 × 10 conic screws to attach the top cover to the baseplate (Figure 61).
4.
5. Install the HVPS front cover.

Figure 62 Connecting the cables to the HVPS

J2
J3
GND
24VDC
HVPS
I/F
OPT#2 SCR#3 OPT#1 BID#7 BID#6
1 Fans
2 J2 connector
3 Cage
6. Connect the cables to the HVPS (Figure 62).
7. Install the HVPS rear cover.

Install the roof covers

Install the two roof covers above and opposite the writing head.
WARNING
BID#5 BID#4 BID#3 BID#2 BID#1
ITM
DANGER
HIGH VOLTAGE
HVPSFANS.CDR
CA294-03070 rev 00
1
2
1
SCR#2 SCR#1
2
3
Installation Manual
page 79 of 153