Figure 40 Securing The Front Connection Bracket And Input Idler - HP Indigo Division Series Instruction For Use & Installation Instructions

Figure 40 Securing the front connection bracket and input idler

1 Input idler
2 PE2 input rollers front wall
3 Front connection bracket
4 Upper screw securing the idler
5 Lower screw securing the front connection bracket
3. Insert and slide the input idler to both the front connection bracket and the PE2 input rollers
front side wall (Figure 40).
4. Secure the idler with two M5 wide head bolts (P/N MBS-0820-10 – upper screw,
P/N MBS-0816-10 – lower screw) at the upper screw holes (Figure 40).
CA294-03070 rev 00
Installation Manual
page 55 of 153