Figure 66 Installing The Stepping Plates To The Ilp - HP Indigo Division Series Instruction For Use & Installation Instructions

Figure 66 Installing the stepping plates to the ILP

EXIT STEPPING
PLATE ASSEMBLY
7 6
1 Lower bracket
2 Upper securing screw
3 Upper frame
4 Upper securing screw
c. Install the exit stepping plate assembly to the ILP using four Allen M5 screws,
washers, and spring washers (Figure 66).
Two screws are inserted at the upper frame and two within the lower bracket slots.
ILP EXIT
5
5 ILP
6 Lower securing screws
7 Stepping plate assembly
CA294-03070 rev 00
Installation Manual
1
2
3
4
page 84 of 153