Figure 21 Leveling Pad; Figure 22 Placing The Leveling Pads On The U-Base - HP Indigo Division Series Instruction For Use & Installation Instructions

Figure 21 Leveling pad

1 Pad
2 Default height adjustment wedge position

Figure 22 Placing the leveling pads on the u-base

1 Leveling pad slots
2 U-base cover
3 Allen M10 height adjustment screw
k. Mount four leveling pads (Figure 21) at the four corner slots of the u-base (Figure 22).
Make sure that the pads are mounted centrally on the slotted areas of the u-base
cover as shown in Figure 22.
4
5
6
CA294-03070 rev 00
3 Allen M10 screw
4 Height adjustment wedge
Leveling pad slots
Leveling pads
Installation Manual
page 38 of 153