Figure 27 Final Position Of Printing Engine On U-Base - HP Indigo Division Series Instruction For Use & Installation Instructions

Figure 27 Final position of printing engine on u-base

1 Securing bracket
p. Disassemble the lifting and positioning jig away from the printing engine.
The printing engine and u-base should appear as shown in Figure 27.
CAUTION:
3. To install the platform between the two printing engines:
a. Insert the platform between the two engines.
b. Use two bolts, washers, and nuts to install the platform at each engine side.
When transporting the printing engine, secure the
engine to the u-base using the securing brackets
(Figure 27).
CA294-03070 rev 00
2 U-base
Installation Manual
page 43 of 153