Figure 72 Adjust The Ilp Feet Height - HP Indigo Division Series Instruction For Use & Installation Instructions

Figure 72 Adjust the ILP feet height

2
1 ILP feet
2 Stepping plate assembly feet (shown raised; 2 each assy)
b. Use a 20 mm wrench to release the upper nut securing the lower height adjustment
nut (Figure 72).
c. Turn the 20 mm height adjustment nut clockwise to lower the feet until the ILP wheels
are just raised by 2-3 mm.
NOTE: Two persons will be necessary for the next procedure.
CA294-03070 rev 00
Installation Manual
1
page 90 of 153