Review Applications; Support Applications - Philips M3150B Installation And Service Manual

Review Applications

Support Applications

Sector Setup allows the user to change the monitoring equipment associated
with a bed.
Stored Waves sets the waves that will be stored for an individual patient.
Standby allows temporary suspension of monitoring for a patient and the
display of standby messages in their Patient Sector.
Alarm Limits provides Arrhythmia Alarm and ST Alarm limits that control
conditions for triggering and turning on and off certain alarms for individual
patients.
Record/Store Alarms controls which alarms are recorded and/or stored for
each patient. This control also affects the Alarm Review application that
provides review recordings of stored alarms.
ST Setup turns ST segment measurements on and off and sets the
measurement point for an individual patient.
Telemetry Setup sets telemetry controls for an individual patient.
Review Applications provide functionality for the Patient Data Review buttons of
the All Controls window. Each review application obtains its specific data for an
individual patient from Database Services and presents it in the Patient Window
display or delivers it to the Philips recorder or printer when requested.
Review Applications include the following for each patient.
Trend Review provides a history of groupings of physiological parameters
plotted over time.
Alarm Review provides a history of alarms, including waves and alarm text.
Event Review provides a history of events detected for a patient along with
waveforms stored at the time of the event.
Wave Review provides a history of full disclosure waveform data that have
been continuously stored.
ST Review displays a history of acquired and derived ST waveforms and
segment values for telemetry monitored patients.
Support Applications is principally software for the Service applications. Most of
these applications run in non-monitoring mode when patient monitoring is turned
off. They used for managing the installation, configuration, and service aspects of the
Information Center system. To access the support applications, a Service password is
required to prevent accidental termination of monitoring and unauthorized access to
system management applications.
Support software contains the following features.
• Support Logs
• Diagnostic Tools
IntelliVue Information Center Application Software
Software Description
3-15