Configuration
Backup Logs
Backup Logs is used to copy all operating system event logs and Information Center logs to
a compressed file on a floppy for later review. Backup Logs is only enabled on the M3170
Patient Link device. The Backup Logs window is shown in Figure 6-8.
Figure 6-8 Backup Logs
The support user can select which of the Information Centers/Clients to obtain the logs from,
and select the destination location. Two files are created, a hostname.zip file that contains the
operating system event logs and all the Information Center log files, and a hostnamejunk.zip
file that contains a .dat file (password protected alarm.log file).
Procedure The procedure for backing up log files is as follows.
Step 1. Select the hostname of the device(s).
Step 2. Verify the location of the destination backup log path. If another location is desired,
press the Browse button.
Step 3. Press the Backup Logs. button to begin backup.
Step 4. Click Next> to save changes and advance to the next window
6-15
Software Installation & Configuration