Table of Contents
Advertisement
Configuring the System
Step 6. Click on Properties to bring up the New Connection Properties window of
Step 7. The Connect Using: field shows the Modem Manufacturer & Model #.
Step 8. Click Cancel to return to the New Connection - HyperTerminal window of
Step 9. Follow the Action steps in Table 8-1 for your Model PC or server to verify the
Action
Type:
Press Enter
Response if OK
Type:
Press Enter
Response if OK
Type:
Press Enter
Response if OK
8-10
Start-up and Configuration
Figure 8-4.
Figure 8-4 New Connection Properties Window
Figure 8-3.
modem connection and dial-in access:
Table 8-1. Modem Test Procedure
D5000A
Model:
P2478U
P2478W
M3168A
AT&F1
OK
ATM0
OK
AT&T8
OK
Notes
resets the modem to factory defaults
- last character is a 0 (zero)
- turns the speaker off
performs local analog loopback with self-test
it is possible to include a blank line before OK
Advertisement
Table of Contents
Troubleshooting
