Interconnecting the System
Step 3. Place the stylus in the stylus holder.
Touch Display
Step 1. Open the Control Panel. Double click the ELO icon to open the ELO Touchscreen
Calibration
Step 2. Press the Video Alignment icon.
Step 3. Follow the instructions on the screen (press 3 targets per screen).
Step 4. Test the touch alignment by following the on screen instructions.
•
•
5-26
Hardware Installation
Properties window.
If touch is ok, press the Green Check icon.
If touch is not ok, press the Arrow icon to redo the calibration.
Video Alignment icon