Entering The Nic Ip Address - Philips M3150B Installation And Service Manual

Procedure
Entering the
The following procedure describes how to enter the IP Address for the NIC. The IP Address
NIC IP
should be provided by the hospital's IT department and be compatible with the hospital's
Address
intranet.
Note If upgrading an existing Database Server with a 2nd NIC card, the OS must be reinstalled so the
appropriate NIC drivers are installed. See "Software Re-Installation Procedure" on page 7-
147.
Step 1. Open Network and Dial-Up Connections by one of the following paths:
Step 2. Double-click on the Network and Dial-Up Connections icon.
Step 3. Select the icon for Hospital LAN. Right-click and select Properties from the drop
Step 4. Click in the circle preceding Use the following IP address and enter the
Note If a customer supplied IP Address is not yet available, change the factory default IP Address to
172.30.221.0 until a customer address is supplied. Do not use an IP Address of the form
172.31.xxx.x, which is used for the primary Clinical Network. If the LAN portion of the web
access card's IP Address is the same as that of the LAN card, Web will not function.
B-4
Web Installation on the Database Server
– from Windows Main Menu: Start / Settings / Network and Dial-Up
Connections
– from Service Menu: Other Services / Control Panel / Network and Dial-
Up Connections
down menu.
following customer supplied information in the fields provided:
IP Address
Subnet Mask
Default Gateway