Table of Contents
Advertisement
The Recorder Rack also includes a Bracket Stand Assembly for providing a stable base for the
Recorder Rack assembly on a flat surface and two blank Rack panels for use when only one
Philips Recorder is used. See Figure 2-17.
Figure 2-17 Recorder Rack with Philips Recorder and Blank Panels
60 VDC Power
The M3180-60040 60VDC Power Supply is a regulated DC power supply that provides the
Supply
60VDC power to the Recorder Rack. Power is supplied via a special Recorder Cable that also
connects the signal from the processing unit. See Figure 2-15.
A mounting bracket is also provided with the Power Supply for mounting it to a surface in an
out-of-the-way location. Installation of a Ferrite Bead Block onto the 230V power cord is
used to suppress potential conductive emissions coming from the 2-channel recorder's power
supply. See Figure 2-18.
The operation of the M1276A #201 Recorder Rack and M3180-60040 60VDC Power Supply
are described in the Philips M1276A #201 Parameter Module Rack Service and
Installation Guide. The following table lists the components of the Philips Recorder System.
Philips Part Number
M1116B #201
M1276-60002
Recorder
Module
Blank
Panels
Power
Supply
60VDC
Output
Figure 2-18 60VDC Recorder Rack Power Supply
Table 2-1. Philips Recorder System Components
Description
Recorder Module(s)
Recorder Rack Assembly
System Components
Recorder
Rack
Bracket
Stand
Mounting
Bracket
Line
Ferrite Bead
Cord
Block
Hardware Description
2-17
Advertisement
Table of Contents
Troubleshooting
