Compaq D510 Pcs - Philips M3150B Installation And Service Manual

Troubleshooting
Step 20. Select INTA for Slots 2 & 6 and Enter
Step 21. Select IRQ 10 and Enter. (Note: Slot 2 may contain an optional Information
Step 22. Select INTA for Slots 3 & 7 and Enter.
Step 23. Select IRQ 11 and Enter. (Note: Slots 3 & 7 are empty)
Step 24. Select INTA for Slots 4 & 8 and Enter.
Step 25. Select IRQ 5 and Enter. (Note: Slot 4 contains the LAN card)
Step 26. Select HP NetRaid and Enter
Step 27. Select IRQ 11 and Enter.
Step 28. Press the keyboard ESC key twice to return to the Configuration menu.
Step 29. Select ISA non-Plug-and-Play Devices and Enter.
Step 30. Select Interrupt Resources and Enter.
Step 31. Select IRQ 3 and Enter.
Step 32. If no external modem is connected, change its value to Reserved and Enter. If an
Step 33. Press the keyboard ESC key three times to go to the Exit Menu.
Step 34. Select EXIT Saving Changes and press Enter to access the Setup Confirmation
Step 35. Select Yes to Save configuration changes and exit now? and press Enter to
Step 36. Continue the OS installation procedure described in Operating System
Compaq D510
PCs
Notes The procedure for setting the BIOS only indicates changes to be made from the system's
Default values. Unless otherwise indicated, retain the system Default settings.
Keyboard arrow keys can be used to move through menu options and change values.
Generally, the keyboard Enter key is used to select a menu item and the keyboard Esc key
is used to return to the previous item.
Step 1. Properly shutdown and restart the PC to reboot it and watch for the <F10 =
Note <F10 = Setup> appears only briefly so be attentive. If you miss it, reboot the PC by
turning the PC Off and then On or simultaneously pressing keyboard Ctrl-Alt-Del
keys.
7-128
Maintenance, Troubleshooting, and Repair
Center Web LAN card)
external modem is connected, set to Available and Enter
window.
save the changes.
Installation.
Setup> message.