Troubleshooting
Status information on each of the NetRaid disks is shown in the Physical Devices field.
Possible status conditions are the following:
For proper Server operation, the status of each disk should be Onlin, as shown in Figure 7-
38.
7-70
Maintenance, Troubleshooting, and Repair
Figure 7-38 HP NetRaid Assistant Window
•
Onlin - disk is operating properly as part of a configured logical drive
•
READY - disk is free to be included in RAID, but has not yet been configured
Failed - disk has failed and may have to be replaced
•
•
Rebuilding - disk is in the process of being rebuilt into a logical drive
•
HOTSP - disk is kept as a Hot Spare (not applicable for the Database Server)