Table of Contents
Advertisement
1 Safety
1.2.1 Safety in the machine controller system
1.2 General safety information
1.2.1 Safety in the machine controller system
Validity and responsibility
The information does not cover how to design, install and operate a complete
system, nor does it cover all peripheral equipment, which can influence the safety
of the total system. To protect personnel, the complete system must be designed
and installed in accordance with the safety requirements set forth in the standards
and regulations of the country where the machine controller is installed.
The users of ABB industrial machine controllers are responsible for ensuring that
the applicable safety laws and regulations in the country concerned are observed
and that the safety devices necessary to protect people working with the machine
controller system are designed and installed correctly. Personnel working with
machine controllers must be familiar with the operation and handling of the industrial
machine controller, described in the applicable documents, e.g. User's Guide and
Product Manual.
Connection of external safety devices
Apart from the built-in safety functions, the machine controller is also supplied with
an interface for the connection of external safety devices. Via this interface, an
external safety function can interact with other machines and peripheral equipment.
This means that control signals can act on safety signals received from the
peripheral equipment as well as from the machine controller.
Limitation of liability
Any information given in this manual regarding safety, must not be construed as
a warranty by ABB that the industrial machine controller will not cause injury or
damage even if all safety instructions are complied with.
Related information
Type of information
Installation of safety
devices
Change operating
modes
Restricting the working
space
Safety information
about the
machine controller
14
Detailed in document
Product manual for the machine controller
Operating manual - IRC5 with FlexPend-
ant
Product manual for the machine controller
Product manual for the machine controller
© Copyright 2016 - 2018 ABB. All rights reserved.
Section
Installation and commis-
sioning
Operating modes
Installation and commis-
sioning
Safety
Product manual - FlexPLP IRPLP 220
3HAW050041018-001 Revision: C
Advertisement
Table of Contents
