Table of Contents
Advertisement
3 Unpacking and handling
3.1 Pre-requisites for reception
Pre-requisites
The check-list below details what must be observed before proceeding with the
unpacking and/or installation of the FlexPLP:
1
2
3
4
Product manual - FlexPLP IRPLP 220
3HAW050041018-001 Revision: C
Action
Make sure that only qualified installation person-
nel conforming to all national and local codes are
allowed to perform the installation.
Make sure that FlexPLP has not been damaged,
by visual inspection.
Make sure that the lifting device to be used is di-
mensioned to handle the weight of FlexPLP.
When these prerequisites have been met, FlexPLP
may be taken to its storage or installation site.
© Copyright 2016 - 2018 ABB. All rights reserved.
3 Unpacking and handling
3.1 Pre-requisites for reception
Note
Specified in
Unpacking and accept-
ance on page
52.
Specified in
Weight on page
49.
51
Advertisement
Table of Contents
