Overview
About this manual
This manual contains instructions for:
Usage
This manual should be used when working during:
Who should read this manual?
This manual is intended for:
Prerequisites
A maintenance/ repair/ installation personnel working with an ABB FlexPLP IRPLP
220 must:
Organization of chapters
The manual is organized in the following chapters:
Chapter
Safety
Product description
Unpacking and handling
Installation and commis-
sioning
Calibration
Maintenance
Product manual - FlexPLP IRPLP 220
3HAW050041018-001 Revision: C
•
the characteristics of the FlexPLP IRPLP 220
•
mechanical and electrical installation instructions for the FlexPLP IRPLP 220
•
maintenance instructions for the FlexPLP IRPLP 220
•
spare parts
•
installation, from lifting the FlexPLP IRPLP 220 to its work site and securing
it to the foundation, to making it ready for operation
•
maintenance work
•
repair work
•
installation personnel
•
maintenance personnel
•
repair personnel.
•
be trained by ABB and have the required knowledge of mechanical and
electrical installation/repair/maintenance work.
Content
Safety information that must be read through before performing
any installation or service work on the FlexPLP IRPLP 220.
Contains general safety aspects as well as more specific inform-
ation about how to avoid personal injuries and damage to the
product.
Specifications and characteristics of the FlexPLP IRPLP 220.
Information relative to the steps following the reception of the
FlexPLP IRPLP 220, until its installation.
Required information about lifting and installation of the FlexPLP
IRPLP 220 and installation of cabling.
Information about calibration of the system.
Step-by-step procedures that describe how to perform mainten-
ance of the FlexPLP IRPLP 220. Based on a maintenance
schedule that may be used in the work of planning periodical
maintenance.
© Copyright 2016 - 2018 ABB. All rights reserved.
Overview
Continues on next page
7