Standard Toolkit - ABB FlexPLP IRPLP 220 Product Manual

9 Reference information

9.4 Standard toolkit

9.4 Standard toolkit
General
All service (repairs, maintenance and installation) procedures contain lists of tools
required to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools
that are considered standard are gathered in the standard toolkit and defined in
the table below.
This way, the tools required are the sum of the standard toolkit and any tools listed
in the instruction.
Contents, standard toolkit
Qty
1
1
1
1
1
1
1
1
134
Tool
Set of spanners
Hex keys (Allen key) 3 mm, 4 mm, 5 mm, and 6 mm
Torque wrench 5 Nm-25 Nm
Ratchet head for torque wrench 1/4"
Socket head cap 4 mm, 5 mm and 6 mm socket 1/4" bit L 20 mm
(for socket head cap screws - ISO 4762)
Plastic mallet
Dowel Pin remover
Mild thread-locker (Recommended: Loctite 243)
© Copyright 2016 - 2018 ABB. All rights reserved.
Product manual - FlexPLP IRPLP 220
3HAW050041018-001 Revision: C